LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System (Diagnostics) >> Warning Light Illumination Pattern >> EBD Warning Light, Abs Warning, VDC Off Indicator Light, VDC Warning Light And VDC Indicator Light Do Not Come On >> Trouble symptom

EBD Warning Light, Abs Warning, VDC Off Indicator Light, VDC Warning Light And VDC Indicator Light Do Not Come On: Trouble symptom

When the ignition switch is turned to ON (engine OFF), EBD warning light, ABS warning light, VDC OFF indicator light, and VDC warning light & VDC indicator light do not illuminate.

NOTE: When pressing the VDC OFF switch for 30 seconds or more, the VDC OFF indicator light goes off and cannot operate any more. When turning the ignition switch from OFF to ON, the OFF operation enabled status is restored.
  1. CHECK OTHER INDICATOR LIGHT. 

    Turn the ignition switch to ON.

    Immediately after the ignition switch is turned to ON, do all the indicator lights for VDC system and others illuminate?

  2. CHECK VDCCM. 

    Connect the Subaru Select Monitor, and display the data monitor of VDCCM with the engine stopped.

    Immediately after the ignition switch is turned to ON, is the [EBD Warning Light] ON?

  3. CHECK VDCCM. 

    Connect the Subaru Select Monitor, and display the data monitor of VDCCM with the engine stopped.

    Immediately after the ignition switch is turned to ON, is the [ABS Warning Lamp] ON?

  4. CHECK VDCCM. 

    Connect the Subaru Select Monitor, and display the data monitor of VDCCM with the engine stopped.

    Immediately after the ignition switch is turned to ON, is the [VDC-OFF Light] ON?

  5. CHECK VDCCM. 

    Connect the Subaru Select Monitor, and display the data monitor of VDCCM with the engine stopped.

    Immediately after the ignition switch is turned to ON, is the [VDC Warning Lamp] ON?

scientia non olet · About LEMON Manuals