DTC C1542 Clutch On Fault: Trouble symptom
Hill start assist does not operate.
NOTE:
Depending on the user clutch operation patterns, the hill start assist warning light may illuminate for a while, and then go off.
Illumination condition:
While the vehicle speed is 10 km/h (6 MPH) or above, and the clutch switch signal ON (depressed) condition continues five minutes or more, if the vehicle speed lowers to 10 km/h (6 MPH) or below, the module judges as abnormal (clutch switch stuck ON), and then turns on the warning light.
Turning off condition:
If the clutch switch signal OFF (foot released) condition continues for 2 seconds, the module turns off the warning light.
The hill start assist function does not operate, while the warning light illuminates.
Illumination condition:
While the vehicle speed is 10 km/h (6 MPH) or above, and the clutch switch signal ON (depressed) condition continues five minutes or more, if the vehicle speed lowers to 10 km/h (6 MPH) or below, the module judges as abnormal (clutch switch stuck ON), and then turns on the warning light.
Turning off condition:
If the clutch switch signal OFF (foot released) condition continues for 2 seconds, the module turns off the warning light.
The hill start assist function does not operate, while the warning light illuminates.