Rear Door Glass: Installation
CAUTION:
- Check that the running channel - rear door is securely fixed to the panel assembly - rear door and to the sash COMPL - lower.
- When installing the glass assembly - rear door, check the running channel - rear door on the lip for peel-off or roll.
NOTE:
Applying parts cleaner, etc. to the sash section will contribute to smooth movement and help install the running channel - rear door.
- Install each part in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Description". Ref. to GLASS/WINDOWS/MIRRORS>General Description>COMPONENT>REAR DOOR GLASS .
- Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .