Passenger's Seat (Model Without Auto) And Rear Seat

Check the resistance between terminals of the switch - power window sub.

Fig 1: Identifying Switch - Power Window Sub Terminals

Courtesy of SUBARU OF AMERICA, INC.

	Terminal No.	Inspection conditions	Standard
Passenger's seat (model without AUTO), rear	6 - 5 8 - 7	UP	Less than 1 Ω
	7 - 6 4 - 6	OFF	1 MΩ or more
	5 - 4 8 - 7	OFF	Less than 1 Ω
	6 - 8 5 - 4	DOWN	Less than 1 Ω

If the inspection result is not within the standard, replace the switch - power window sub.