LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Heater System >> Installation >> Seat Heater Unit - Rear

Seat Heater Unit - Rear

  1. Install the seat heater module - rear.

    Tightening torque:

    13 N.m (1.34 kgf-m, 9.6 ft-lb)

  2. Install the trim panel - rear apron RH. Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>INSTALLATION .
  3. Install the battery sensor to the ground terminal. Ref. to NOTE>NOTE>BATTERY .