LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Rear Seat >> Installation

Rear Seat: Installation

  1. Install each part in the reverse order of removal.
    NOTE:
    • After installing the backrest assembly, make sure that each seat belt operates normally.
    • Make sure that they are properly secured on each hook on the vehicle side.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description". Ref. to SEATS>General Description>COMPONENT>REAR SEAT .

  2. Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
scientia non olet · About LEMON Manuals