LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Power Rear Gate (Service Information) >> Power Rear Gate Driver's Switch >> Removal

Power Rear Gate Driver's Switch: Removal

NOTE: The power rear gate driver's switch is integrated with the VDC OFF switch.
  1. Disconnect the ground cable from battery. Ref. to BATTERY .
  2. Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  3. Remove the VDC OFF & power rear gate driver's switch.
    1. Release the claws and pull out each switch.
    2. Remove the connector from the panel - switch, and then remove the VDC OFF & power rear gate driver's switch.
      Fig 1: Identifying Power Rear Gate Driver's Switch
      G09483448Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals