LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Power Rear Gate (Service Information) >> Power Rear Gate Buzzer >> Inspection

Power Rear Gate Buzzer: Inspection

  1. Use the following procedures to check that the buzzer sounds.
    1. Turn the ignition switch to OFF.
    2. Fully close the rear gate.
    3. Turn the memory height switch to OFF.
    4. Press and hold the power rear gate driver's switch to open the power rear gate.
    5. Repeat tapping the power rear gate driver's switch to reverse the power rear gate three times so that the door free condition can be achieved.
    6. Did the buzzer sound during the operation in step (5)?
  2. If the buzzer does not operate properly, replace the power rear gate buzzer.