Power Rear Gate (Service Information): General Description: Caution

Before disassembling or reassembling parts, always disconnect the battery ground cable from battery. When replacing the audio, control module and other parts provided with memory functions, record the memory contents before disconnecting the battery ground cable. Otherwise, the memory is cleared.
Reassemble the parts in the reverse order of disassembly procedure unless otherwise indicated.
Adjust parts to the given specifications.
Connect the connectors securely during reassembly.
After reassembly, close the rear gate and then connect the battery ground cable. Initialization of the power rear gate auto closer is necessary, when connection is performed with the rear gate open. < Ref. to INITIALIZATION , PROCEDURE, Power Rear Gate System. >
After reassembly, make sure that the each component operates normally.