| U0073 |
CAN FAILURE, BUS 'OFF' DETECTION |
Detected when CAN line abnormality is detected. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC U0073 CM COMMUNICATION BUS OFF . |
| U0100 |
LOST COMMUNICATION WITH ECM/PCM "A" |
Detected when CAN data from the engine CM (ECM) does not arrive. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC U0100 LOST COMMUNICATION WITH ECM/PCM "A" . |
| U0101 |
LOST COMMUNICATION WITH TCM |
Detected when CAN data from TCM does not arrive. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC U0101 LOST COMMUNICATION WITH TCM . |
| U0122 |
LOST COMMUNICATION WITH VEHICLE DYNAMICS CM |
Detected when CAN data from VDC does not arrive. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CM . |
| U0140 |
LOST COMMUNICATION WITH BODY CM |
Detected when CAN data from BIU does not arrive. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC U0140 LOST COMMUNICATION WITH BODY CM . |
| U0155 |
LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CM |
Detected when CAN data from meter does not arrive. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC U0155 LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CM . |
| U0401 |
INVALID DATA RECEIVED FROM ECM/PCM "A" |
Detected when there is malfunction in CAN data from the engine CM (ECM). |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC U0401 INVALID DATA RECEIVED FROM ECM/PCM "A" . |
| U0422 |
INVALID DATA RECEIVED FROM BODY CM |
Detected when CAN data from BIU is abnormal. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC U0422 INVALID DATA RECEIVED FROM BODY CM . |
| B1242 |
Wireless tuner |
When short circuit occurs in harness between keyless access CM and receiver. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B1242 Wireless tuner . |
| B2271 |
IGN relay control circuit |
- When malfunction is detected in IG1 and IG2 drive circuits in the keyless access CM.
- When malfunction is detected in IG hold circuit in the keyless access CM.
|
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2271 IGN relay control circuit . |
| B2274 |
ACC relay control circuit |
When malfunction is detected in ACC relay drive circuit in the keyless access CM or external circuit. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2274 ACC relay control circuit . |
| B2275 |
Engine start request control circuit |
- When malfunction is detected in engine start permission signal output circuit in the keyless access CM.
- When malfunction is detected in external engine start permission signal circuit.
|
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2275 Engine start request control circuit . |
| B2276 |
CC relay off signal |
When input error occurs in accessory relay cut input signal of keyless access CM. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2276 ACC relay off signal . |
| B2277 |
Submerging circuit |
When the water-submersion detection circuit integrated into the keyless access CM detects the water submersion. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2277 Submerging circuit . |
| B2282 |
Vehicle speed signal correlation |
When the vehicle speed signal transmitted from the combination meter via solid line and the vehicle speed signal transmitted via CAN communication line do not match. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2282 Vehicle speed signal correlation . |
| B2283 |
Vehicle speed sensor |
Either of the following malfunctions is detected. (Vehicle speed sensor failure is detected.)
- Vehicle speed signal failure detection 1: Excessive deceleration detection
- Vehicle speed signal failure detection 2: Engine speed interlock detection
|
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2283 Vehicle speed sensor . |
| B2284 |
Brake signal correlation |
When the brake signal transmitted via solid line and the brake signal transmitted via CAN communication line do not match. (AT model only) |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2284 Brake signal correlation . |
| B2285 |
Steering lock position signal correlation |
When the steering lock position signal transmitted from the steering lock CM via solid line and the steering lock position signal transmitted via LIN communication system do not match. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2285 Steering lock position signal correlation . |
| B2286 |
Engine speed signal(without Auto Start Stop) |
When the engine speed signal transmitted from the ECM via solid line and the engine speed signal transmitted via CAN communication line do not match. (Without Auto Start Stop) |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2286 Engine speed signal(without Auto Start Stop) . |
| B2779 |
Remote control engine starter collation |
When the keyless access CM does not respond to engine start even when the remote control engine starter is ON, or when there is a code mismatch. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2779 Remote control engine starter collation . |
| B2781 |
Steering Lock CM control circuit |
- When malfunction is detected in lock/unlock position detection sensor.
- When the open or short circuit in the steering lock motor drive circuit is detected.
|
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2781 Steering Lock CM control circuit . |
| B2782 |
Steering lock drive request signal correlation |
When the open or short circuit in the steering lock motor power supply circuit is detected. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2782 Steering lock drive request signal correlation . |
| B2784 |
Antenna circuit (Push Engine Switch) |
When open or short circuit occurs in the antenna coil. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2784 Antenna circuit (Push Engine Switch) . |
| B2785 |
LIN communication |
When the keyless access CM detected the collation system LIN bus communication error three times in a row. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2785 LIN communication . |
| B2786 |
Steering Lock CM communication |
When communication between keyless access CM and steering lock CM is interrupted for a set amount of time. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2786 Steering Lock CM communication . |
| B2788 |
IGN signal correlation (Steering Lock CM) |
When mismatch occurs in the IG1 input of the steering lock CM for both LIN communication line input and solid line input. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2788 IGN signal correlation (Steering Lock CM) . |
| B2789 |
ID Code Box communication |
- When communication between keyless access CM and ID code box is interrupted for a set amount of time.
- Open or short circuit in the wiring harness between keyless access CM and ID code box
|
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2789 ID Code Box communication . |
| B278A |
Push Engine Switch power supply circuit |
When the power supply circuit of the push button ignition switch is shorted to ground. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B278A Push Engine Switch power supply circuit . |
| B278D |
ID Code Box judgment circuit |
When ID code box setting is set to OFF, ID code box LIN signal is received. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B278D ID Code Box judgment circuit . |
| B2790 |
ID Code Box circuit |
An error has occurred inside the ID code box. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2790 ID Code Box circuit . |
| B27A1 |
Driver side external antenna open |
When open circuit occurs in the harness between keyless access CM and driver's side front door outer handle. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B27A1 Driver side external antenna open . |
| B27A2 |
Passenger side external antenna open |
When open circuit occurs in the harness between keyless access CM and passenger's side front door outer handle. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B27A2 Passenger side external antenna open . |
| B27A5 |
Front internal antenna open |
When open circuit occurs in the harness between keyless access CM and front interior antenna. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B27A5 Front internal antenna open . |
| B27A6 |
Rear internal antenna open |
When open circuit occurs in the harness between keyless access CM and rear interior antenna. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B27A6 Rear internal antenna open . |
| B27A7 |
Trunk/rear gate internal antenna open |
When open circuit occurs in the harness between keyless access CM and rear interior antenna. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B27A7 Trunk/rear gate internal antenna open . |
| B27A8 |
Trunk/rear gate external antenna open |
When open circuit occurs in the harness between keyless access CM and rear exterior antenna. |
Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B27A8 Trunk/rear gate external antenna open . |