Keyless Access Passenger Room Buzzer Does Not Sound
CAUTION:
- Inspect LAN system according to the basic diagnostic procedure, and make sure that there is no fault.
- Check that the keyless access function is not stopped.
- When the access key or keyless access CM is replaced, registration of the immobilizer is required. For the relevant procedures, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume. Contact an authorized Subaru Dealership.
- CHECK COMBINATION METER.
Check the combination meter. Ref. to COMBINATION METER (DIAGNOSTICS)>Basic Diagnostic Procedure .
Is the check result OK?
- Yes : Replace the keyless access CM. Ref. to SECURITY AND LOCKS>Keyless Access CM>REMOVAL .
- No : Replace the combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>Combination Meter>REMOVAL .