Clear memory: Operation

On [Start] display, select [Diagnosis].
On [Vehicle selection] display, input the target vehicle information and select [OK].
On [Main Menu] display, select [Each System].
On [Select System] display, select [Keyless Access with Push Button Start], and then select [Enter].
On [Select Function] display, select [DTC].
On [DTC] display, select [Clear memory].
NOTE:
- For detailed operation procedures, refer to "Application help".
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.