LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Security System >> Inspection >> Check Horn

Check Horn

  1. CHECK HORN OPERATION  .

    Check the horn sounds when the horn switch is pushed.

    Does the horn sound?

    1. Yes: Go to 2  .
    2. No: Check the horn circuit.
  2. CHECK BODY INTEGRATED UNIT  .

    Select and perform the [Horn Output] using Subaru Select Monitor.

    NOTE: For detailed operation procedures, refer to "Application help".

    Does the horn sound?

    1. Yes: Horn circuit is OK.
    2. No: Go to 3  .
  3. CHECK HORN RELAY CIRCUIT  .
    1. Turn the ignition switch to OFF.
    2. Disconnect the connector of body integrated unit.
    3. Remove the horn relay.
    4. Check the harness between body integrated unit and horn relay.

      Connector & terminal 

      (B280) No. 24 - Horn relay No. 4:

    Is harness normal?

    1. Yes: Check body integrated unit. Ref. to BODY CONTROL(DIAGNOSTICS)>Basic Diagnostic Procedure .
    2. No: Repair or replace the harness.
scientia non olet · About LEMON Manuals