Rear Antenna
CAUTION:
- Do not detach the antenna except when replacing it. Detaching unnecessarily will lead to insecure attachment of the antenna.
- When replacing the antenna, do not reuse the tapping screw. Always replace with new tapping screws.
- Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>NOTE>BATTERY
.NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
- Remove the garnish assembly - rear gate. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>REMOVAL .
- Remove the rear antenna assembly - exterior.
- Disconnect the connector.
- Remove the screws, and remove the rear antenna assembly - exterior.