LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Impact Sensor >> Removal

Impact Sensor: Removal

  1. Pull out the key from the ignition switch, or turn the ignition to OFF.
  2. Close all the doors and rear gate.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  5. Remove the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
scientia non olet · About LEMON Manuals