LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Impact Sensor >> Installation

Impact Sensor: Installation

  1. Pull out the key from the ignition switch, or turn the ignition to OFF.
  2. Close all the doors and rear gate.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Install the impact sensor.
  5. Change the setting of impact sensor using Subaru Select Monitor.
  6. Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
scientia non olet · About LEMON Manuals