Washer Tank and Motor: Installation
CAUTION:
When the motor pump assembly - washer is removed, do not reuse the packing - washer motor. Always replace with a new part.
- Install each part in the reverse order of removal.
Tightening torque:
6 N.m (0.61 kgf-m, 4.4 ft-lb)
- Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
- Add new washer fluid.
- Adjust the fog light beam. (Model with fog light) Ref. to LIGHTING SYSTEM>Front Fog Light Assembly>ADJUSTMENT>FOG LIGHT AIMING .