Rear Wiper Motor: Installation

Install the motor assembly - rear wiper and the arm assembly - rear wiper.
CAUTION: Attach so that the mark on the cap - pivot wiper faces upward.

Fig 1: Identifying Mark On Cap - Pivot
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Refer to "COMPONENT" of "General Description". Ref. to WIPER AND WASHER SYSTEMS>General Description>COMPONENT>REAR WIPER .
Install the remaining parts in the reverse order of removal.
CAUTION: For installation of the rod - power rear gate, refer to "INSTALLATION", "Power Rear Gate Rod" in the "POWER REAR GATE" section and observe the precautions for installation. Ref. to INSTALLATION .
Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .