Front Wiper Motor and Link: Inspection

1. When the battery is connected to the terminal of connectors, confirm that the motor operates at low speed.
2. When the battery is connected to the terminal of connectors, confirm that the motor operates at high speed.
3. Connect the battery to terminals of the connector, and remove the terminal connection with motor rotating at low speed, and stop the motor assembly - windshield wiper in mid-operation.
4. Connect the battery and check that the motor stops at the automatic stop position after the motor operates at low speed.

CAUTION: Fix the motor to prevent the motor from being shorted by moving during operation.

Fig 1: Connecting Battery To Terminals And Connector End View

Courtesy of SUBARU OF AMERICA, INC.