Spot Map Light Switch
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Courtesy of SUBARU OF AMERICA, INC.
- Models without EyeSight
| Terminal No. |
Inspection conditions |
Standard |
| 6 - 5 |
Switch OFF |
1 MΩ or more |
| Switch ON |
Approx. 18 Ω |
- Models with EyeSight
| Terminal No. |
Inspection conditions |
Standard |
| 7 - 8 |
Switch OFF |
1 MΩ or more |
| Switch ON |
Approx. 18 Ω |
- Replace the light assembly - map if the inspection result is not within the standard value.