Check Daytime Running Light & High Beam Relay
- Check the resistance between unit connector terminals.
Terminal No. Inspection conditions Standard Connector & circuit 3 - 4 Always 1 MΩ or more 3 - 4 Apply battery voltage between terminals 1 and 2. Less than 1 Ω 7 - 8 Always 1 MΩ or more 7 - 9 Always Less than 1 Ω 7 - 8 Apply battery voltage between terminals 5 and 6. Less than 1 Ω - Replace the daytime running light relay unit if the inspection result is not within the standard value.