Headlight Assembly: Installation

Install each part in the reverse order of removal.
NOTE: Secure the flange information of the bumper face - front to the bracket - front bumper side.

Tightening torque:

Light assembly - head: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Check and adjust the clearance between the hood COMPL - front and the light assembly - head. Ref. to EXTERIOR BODY PANELS>Front Hood>ADJUSTMENT .
Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
Adjust the headlight beam and fog light beam.
- Adjust the headlight beam. Ref. to LIGHTING SYSTEM>Headlight Assembly>ADJUSTMENT>HEADLIGHT BEAM ADJUSTMENT .
- Adjust the fog light beam. (Model with fog light) Ref. to LIGHTING SYSTEM>Front Fog Light Assembly>ADJUSTMENT>FOG LIGHT AIMING .