LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Diagnostics with Phenomenon >> Inspection >> Bluetooth DOES NOT OPERATE

Bluetooth DOES NOT OPERATE

  1. CHECK Bluetooth DEVICE. 

    Restart the Bluetooth device, and connect.

    Does it start properly?

    • Yes  : Currently no failure is found.
    • No  : Go to  2.
  2. CHECK Bluetooth DEVICE. 

    Re-register the Bluetooth device, and connect.

    Is communication successful?

    • Yes  : Currently no failure is found.
    • No  : Go to  3.
  3. CHECK Bluetooth DEVICE. 
    1. Connect another Bluetooth device.
      NOTE: For Bluetooth supported standard, refer to the Notes in the margin.

      Is connection established?

      • Yes  : Bluetooth device which cannot be connected might be faulty.
      • No  : Go to  4.
  4. CHECK ENVIRONMENTAL CONDITION. 

    Check if any external devices which emit strong electromagnetic waves and noises, such as a radio antenna, is installed inside the vehicle.

    Is an external device installed?

    • Yes  : Remove the external device and perform the inspection from step 1.
    • No  : Replace the unit. Ref. to ENTERTAINMENT>Audio .
NOTE: Supported standard

Supported standard for model with 7-inch display: Ver. 3.0+EDR supported

  • Bluetooth Phone

    Profile

    • HFP: Ver. 1.6
    • OPP: Ver. 1.2
    • PBAP: Ver. 1.1
    • MAP: Ver. 1.0
    • SPP: Ver. 1.1
  • Bluetooth Audio Device

    Profile

    • A2DP: Ver. 1.2
    • AVRCP: Ver. 1.4

    Supported standard for model with 6.2-inch display: Ver. 2.1+EDR supported

  • Bluetooth Phone

    Profile

    • HFP: Ver. 1.5
    • OPP: Ver. 1.1
    • PBAP: Ver. 1.0
    • MAP: Ver. 1.0
    • SPP: Ver. 1.0
  • Bluetooth Audio Device

Profile

  • A2DP: Ver. 1.2
  • AVRCP: Ver. 1.4