LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Audio System >> Operation >> Radio Frequency Range Switch-Over

Radio Frequency Range Switch-Over

NOTE:
  • Some items are not displayed according to destination.
  • Displayed only for model with 6.2 inch display.
  1. Turn the ignition switch to ACC.
  2. Press the button (a) to display the Audio OFF screen.
  3. Touch the screen in order from (b) to (e).
    Fig 1: Identifying Radio Frequency Range Switch-Over
    G10272632Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Pressing the button (a) or turning the ignition switch from the OFF to ACC position can exit the Line Diag mode.
  4. {Line Diag} screen is displayed.
    Fig 2: Screen Display - Line Diag
    G10298683Courtesy of SUBARU OF AMERICA, INC.
  5. Touch {Dealer Diag} on the {Line Diag} screen.
  6. The {Dealer Diag} screen is displayed.
    Fig 3: Screen Display - Dealer Diag
    G10319525Courtesy of SUBARU OF AMERICA, INC.
  7. Touch the {9kHz} or {10kHz} key to switch the AM radio frequency range.
Display key Frequency range
9 kHz Set the AM frequency range to 531 - 1629 kHz.
10 kHz Set the AM frequency range to 530 - 1710 kHz.
NOTE:
  • When the setting is changed, reboot confirmation for frequency switch-over is displayed. Select {OK} to reboot. When {cancel} is pressed, the {Dealer Diag} screen is displayed.
  • The initial settings is at 9 kHz.
scientia non olet · About LEMON Manuals