Model With 6.2 Inch Display

1. Turn the ignition switch to ACC.
2. Press the button (a) to display the Audio OFF screen.
3. Touch the screen in order from (b) to (e).
   Fig 1: Checking Connections With Line Diag Mode

   Courtesy of SUBARU OF AMERICA, INC.
   NOTE: Pressing the button (a) or turning the ignition switch from the OFF to ACC position can exit the Line Diag mode.
4. {Line Diag} screen is displayed.
5. Check the connection status with the {Connectivity Check} in the {Line Diag} screen.

Fig 2: Checking Connection Status With (Connectivity Check) In (Line Diag) Screen

Courtesy of SUBARU OF AMERICA, INC.

OK: Each connection device is connected properly.

NG: No connection or abnormal connection is detected.