Freeze Frame Data Display: Operation

On [Start] display, select [Diagnosis].
On [Vehicle selection] display, input the target vehicle information and select [OK].
On [Main Menu] display, select [Each System].
On [Select System] display, select [EyeSight], and then select [Enter].
On [Select Function] display, select [DTC].
On [DTC] display, select [FFD].
NOTE:
- For detailed operation procedures, refer to "Application help".
- Freeze frame data is stored for three DTCs. Allocation of the three DTCs are as follows:
  - DTC that occurred first.
  - DTC that occurred first during the latest driving cycle (from IGN ON to IGN OFF).
  - DTC that occurred first during the second latest driving cycle.
  - However, DTCs will be stored in order of occurrence until these three DTCs are stored.
- For details on freeze frame data, refer to List of freeze frame data. Ref. to EyeSight (DIAGNOSTICS)>Freeze Frame Data Display>LIST .
- Freeze frame data is cleared by Clear Memory. Ref. to EyeSight (DIAGNOSTICS)>Clear memory .