Diagnostic Code(s) Display: Operation

On [Start] display, select [Diagnosis].
On [Vehicle selection] display, input the target vehicle information and select [OK].
On [Main Menu] display, select [Each System].
On [Select System] display, select [EyeSight], and then select [Enter].
On [Select Function] display, select [DTC].
NOTE:
- For detailed operation procedures, refer to "Application help".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Ref. to EyeSight (DIAGNOSTICS)>Diagnostic Code(s) Display>LIST .
- Up to ten codes can be stored. When more than ten codes are output, they will not be stored.
- The same code is stored only once, and even when the same code occurs several times, information will not be updated.