Active Lane Keep System Code(s) Display: Operation

Lane Departure Prevention Deactivate Code(s) Display: The lane departure prevention deactivate code is output, when the lane keep (lane departure prevention) is canceled during the operation or the standby state is canceled.

1. On [Start] display, select [Diagnosis].
2. On [Vehicle selection] display, input the target vehicle information and select [OK].
3. On [Main Menu] display, select [Each System].
4. On [Select System] display, select [EyeSight], and then select [Enter].
5. On [Select Function] display, select [Cancel Code].
6. On [Cancel Code] display, select [Lane Departure Prevention Assist Deactivate Code(s) Display].
   NOTE:

   • For detailed operation procedures, refer to "Application help".
   • Up to eight codes can be stored. When more than eight codes are output, the oldest code will be deleted to store the latest code.
   • Stored codes will be cleared by Clear Memory.
   • For details on lane keep assist codes, refer to List of lane keep assist code. Ref. to EyeSight (DIAGNOSTICS)>Active Lane Keep System Code(s) Display>OPERATION .