Pre-Collision Brake Off Switch And Lane Departure Warning Off Switch
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Courtesy of SUBARU OF AMERICA, INC.
- Pre-Collision OFF Switch
Terminal No. Inspection conditions Standard 3 - 5 OFF Approx. 1 kΩ ON Less than 1 Ω - LDP OFF Switch
Terminal No. Inspection conditions Standard 4 - 5 OFF Approx. 1 kΩ ON Less than 1 Ω - Pre-Collision OFF Switch
- Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.
Terminal No. Inspection conditions Specification 1 (+) - 2 (-) Apply battery voltage. Light ON - Replace the stereo camera cover assembly if faulty is found in the inspection.