Inspection Mode 2
| DTC | Item | Note |
|---|---|---|
| B2300 | REAR RADAR CIRCUIT LOW | - |
| B2301 | REAR RADAR CIRCUIT HIGH | - |
- Perform the Clear Memory Mode. Ref. to Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS)>Clear memory .
- Read the DTC and check that the DTC is not displayed. Ref. to Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Start the engine.
- Perform the active test [Door mirror indicator active test]. Ref. to Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS)>Active Test .
- Read the DTC and check that the DTC is not displayed. Ref. to Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. Ref. to Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS)>List of Diagnostic Trouble Code (DTC) .