Real-time Diagnosis: Operation
- On [Start] display, select [Diagnosis].
- On [Select Vehicle] display, input the target vehicle information and select [OK].
- On [Main Menu] display, select [Each System].
- On [Select System] display, select [Engine], and then select [Next].
- On [Select Function] display, select [Data Monitor].
- Make sure that normal display is shown when operated as follows:
- Depress and release the brake pedal. (Stop light switch and brake switch are turned ON.)
- Turn the CRUISE switch to ON.
- Turn the CANCEL switch to ON.
- Turn the SET/- switch to ON.
- Turn the RES/+ switch to ON.
- Depress or release the clutch switch.
- Place the shift lever in any position other than neutral.
NOTE:
For detailed operation procedures, refer to "Application help".