Illumination Is Fixed At The Maximum Brightness

CHECK DTC (CURRENT MALFUNCTION).
Read DTC of combination meter. Ref. to COMBINATION METER (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .

Are any DTCs displayed?
- Yes : Perform the diagnosis for the displayed DTCs.
- No : Go to 2.
CHECK DTC (CURRENT MALFUNCTION).
1. Start the engine.
2. Read all DTCs. Ref. to LAN SYSTEM (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .
Is DTC U**** displayed?
- Yes : Perform the diagnosis according to the basic diagnostic procedure in LAN SYSTEM (DIAGNOSTICS). Ref. to LAN SYSTEM (DIAGNOSTICS)>Basic Diagnostic Procedure .
- No : Go to 3.
CHECK ILLUMINATION.
Connect the Subaru Select Monitor, and perform forced operation of the [Illumination Check] with [Active Test] for the combination meter. Ref. to COMBINATION METER (DIAGNOSTICS)>Active Test .

Do the indication on Subaru Select Monitor and the indicator indication match?
- Yes : Check the clearance light & illumination light system. Ref. to LIGHTING SYSTEM>Clearance Light and Illumination Light System .
- No : Replace the combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>Combination Meter .