Cruise Control Indicator Does Not Illuminate

CHECK DTC (CURRENT MALFUNCTION).
1. Start the engine.
2. Read all DTCs. Ref. to LAN SYSTEM (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .
Is DTC U**** displayed?
- Yes : Perform the diagnosis according to the basic diagnostic procedure in LAN SYSTEM (DIAGNOSTICS). Ref. to LAN SYSTEM (DIAGNOSTICS)>Basic Diagnostic Procedure .
- No : Go to 2.
CHECK DATA MONITOR OF ENGINE.
Connect the Subaru Select Monitor, and display the data monitor of the engine: [Main Switch]. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Subaru Select Monitor>OPERATION>DATA MONITOR . Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Subaru Select Monitor>OPERATION>DATA MONITOR .

Do the switch operation and data indication match?
- Yes : Replace the combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>Combination Meter .
- No : Check the cruise control command switch. Ref. to CRUISE CONTROL SYSTEM>Cruise Control Command Switch .