Electrical Specification

For I/O signals of the body integrated unit, refer to BODY CONTROL SYSTEM (DIAGNOSTICS). Ref. to BODY CONTROL(DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of ECM, refer to ENGINE (DIAGNOSTICS). Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Engine Control Module (ECM) I/O Signal>ELECTRICAL SPECIFICATION .

For I/O signals of TCM, refer to TRANSMISSION (DIAGNOSTICS). Ref. to TRANSMISSION (DIAGNOSTICS)>Transmission Control Module (TCM) I/O Signal .

For the module I/O signals of VDC Control Module, steering angle sensor, and yaw rate & G sensor, refer to BRAKE CONTROL (DIAGNOSTICS). Ref. to BRAKE CONTROL (DIAGNOSTICS)>Control Module I/O Signal .

For unit I/O signals of power steering Control Module, refer to POWER STEERING (DIAGNOSTICS). Ref. to POWER STEERING (DIAGNOSTICS)>Control Module I/O Signal .

For unit I/O signals of A/C control panel, refer to AIR CONDITIONER (DIAGNOSTICS). Ref. to AIR CONDITIONER (DIAGNOSTICS)>Auto A/C Control Module I/O Signal .

For I/O signals of combination meter, refer to COMBINATION METER (DIAGNOSTICS). Ref. to COMBINATION METER (DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of the airbag Control Module, refer to AIRBAG SYSTEM (DIAGNOSTICS). Ref. to AIRBAG(DIAGNOSTICS)>Airbag Control Module I/O Signal .

For I/O signals of high grade MFD, refer to MULTIFUNCTION DISPLAY (DIAGNOSTICS). Ref. to MULTIFUNCTION DISPLAY(DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of keyless access Control Module, refer to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS). Ref. to KEYLESS ACCESS WITH PUSH BUTTON START(DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of stereo camera, refer to EyeSight (Diagnostics). Ref. to EyeSight (DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of auto headlight beam leveler Control Module, refer to HEADLIGHT/FOGLIGHT (DIAGNOSTICS). Ref. to HEADLIGHT/FOGLIGHT(DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of DCM, refer to TELEMATICS (DIAGNOSTICS). Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of the radar sensor, refer to BSD/RCTA (DIAGNOSTICS). Ref. to Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of the RAB Control Module, refer to Reverse Automatic Braking (DIAGNOSTICS). Ref. to Reverse Automatic Braking(DIAGNOSTICS)>Control Module I/O Signal .

For I/O signals of data link connector, refer to ENGINE (DIAGNOSTICS). Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Data Link Connector .