Related Lines 53 - 61 Ω (TCM): Wiring diagram
CAN communication system Ref. to WIRING SYSTEM>CAN Communication System>WIRING DIAGRAM .
- Non-turbo model
NOTE:
Perform inspection when no data is received, or faulty is detected. This is different from power supply shorted or ground shorted.
- CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS.
- Disconnect the TCM connector.
- Using the tester, measure the resistance between terminals.
Connector & terminal
(B54) No. 43 - No. 44:
Is the resistance 400 Ω or more?
- Yes : Related lines between TCM and main wiring harness is open, or main wiring harness is open at two places or more.
- No : Go to 2.
- CHECK RELATED LINES.
Using the tester, measure the resistance between terminals.
Connector & terminal
(B54) No. 44 - (B40) No. 14:
(B54) No. 43 - (B40) No. 6:
Is the resistance 10 Ω or more?
- Yes : Repair or replace the open circuit of TCM related lines.
- No : Check DTC of TCM. Ref. to TRANSMISSION (DIAGNOSTICS)>Read Diagnostic Trouble Code (DTC) .