Related Lines 53 - 61 Ω (Stereo Camera): Wiring diagram

CAN communication system Ref. to WIRING SYSTEM>CAN Communication System>WIRING DIAGRAM .

• Non-turbo model

Fig 1: Stereo Camera System Wiring Diagram Non-Turbo Model (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Stereo Camera System Wiring Diagram Non-Turbo Model (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

• Turbo model

Fig 3: Stereo Camera System Wiring Diagram Turbo Model (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Stereo Camera System Wiring Diagram Turbo Model (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

1. CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS. 
   1. Disconnect the stereo camera connector.
   2. Using the tester, measure the resistance between terminals.

      Connector & terminal 

      (R137) No. 10 - No. 9:

   Is the resistance 400 Ω or more?

   • Yes  : Related lines between stereo camera and main wiring harness is open, or main wiring harness is open at two places or more.
   • No  : Go to 2. 
2. CHECK RELATED LINES. 

   Using the tester, measure the resistance between terminals.

   Connector & terminal 

   (R137) No. 9 - (B40) No. 14:

   (R137) No. 10 - (B40) No. 6:

   Is the resistance 10 Ω or more?

   • Yes  : Repair or replace the open circuit of stereo camera related lines.
   • No  : Check DTC of stereo camera. Ref. to EyeSight (DIAGNOSTICS)>Basic Diagnostic Procedure .