Related Lines 53 - 61 Ω (Steering Angle Sensor): Wiring diagram

CAN communication system Ref. to WIRING SYSTEM>CAN Communication System>WIRING DIAGRAM .

• Non-turbo model

Fig 1: Steering Angle Sensor System Wiring Diagram Non-Turbo Model (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Steering Angle Sensor System Wiring Diagram Non-Turbo Model (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Steering Angle Sensor System Wiring Diagram Turbo Model (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Steering Angle Sensor System Wiring Diagram Turbo Model (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

1. CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS. 
   1. Disconnect the steering angle sensor connector.
   2. Using the tester, measure the resistance between terminals.

      Connector & terminal 

      (B231) No. 2 - No. 3:

   Is the resistance 400 Ω or more?

   • Yes  : Related lines between steering angle sensor and main wiring harness is open, or main wiring harness is open at two places or more.
   • No  : Go to 2. 
2. CHECK RELATED LINES. 

   Using the tester, measure the resistance between terminals.

   Connector & terminal 

   (B231) No. 2 - (B40) No. 14:

   (B231) No. 3 - (B40) No. 6:

   Is the resistance 10 Ω or more?

   • Yes  : Repair or replace the open circuit of steering angle sensor related lines.
   • No  : Check DTC of VDC Control Module. Ref. to BRAKE CONTROL (DIAGNOSTICS)>Basic Diagnostic Procedure .