Related Lines 53 - 61 Ω (Keyless Access System): Wiring diagram

CAN communication system Ref. to WIRING SYSTEM>CAN Communication System>WIRING DIAGRAM .

• Non-turbo model

Fig 1: Keyless Access System Wiring Diagram Non-Turbo Model (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Keyless Access System Wiring Diagram Non-Turbo Model (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

• Turbo model

Fig 3: Keyless Access System Wiring Diagram Turbo Model (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Keyless Access System Wiring Diagram Turbo Model (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

1. CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS. 
   1. Disconnect the keyless access Control Module connector.
   2. Using the tester, measure the resistance between terminals.

      Connector & terminal 

      (B574) No. 14 - No. 15:

   Is the resistance 400 Ω or more?

   • Yes  : Related lines between keyless access Control Module and main wiring harness is open, or main wiring harness is open at two places or more.
   • No  : Go to 2. 
2. CHECK RELATED LINES. 

   Using the tester, measure the resistance between terminals.

   Connector & terminal 

   (B574) No. 15 - (B40) No. 14:

   (B574) No. 14 - (B40) No. 6:

   Is the resistance 10 Ω or more?

   • Yes  : Repair or replace the open circuit of keyless access Control Module related lines.
   • No  : Check DTC of keyless access Control Module. Ref. to KEYLESS ACCESS WITH PUSH BUTTON START(DIAGNOSTICS)>Basic Diagnostic Procedure .