Related Lines 53 - 61 Ω (Combination Meter): Wiring diagram

CAN communication system Ref. to WIRING SYSTEM>CAN Communication System>WIRING DIAGRAM .

• Non-turbo model

Fig 1: Combination Meter System Wiring Diagram Non-Turbo Model (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Combination Meter System Wiring Diagram Non-Turbo Model (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

• Turbo model

Fig 3: Combination Meter System Wiring Diagram Turbo Model (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Combination Meter System Wiring Diagram Turbo Model (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

1. CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS. 
   1. Disconnect the combination meter connector.
   2. Using the tester, measure the resistance between terminals.

      Connector & terminal 

      (i10) No. 32 - No. 33:

   Is the resistance 400 Ω or more?

   • Yes  : Related lines between combination meter and main wiring harness is open, or main wiring harness is open at two places or more.
   • No  : Go to 2. 
2. CHECK RELATED LINES. 

   Using the tester, measure the resistance between terminals.

   Connector & terminal 

   (i10) No. 32 - (B40) No. 14:

   (i10) No. 33 - (B40) No. 6:

   Is the resistance 10 Ω or more?

   • Yes  : Repair or replace the open circuit of combination meter related lines.
   • No  : Check DTC of combination meter. Ref. to COMBINATION METER (DIAGNOSTICS)>Basic Diagnostic Procedure .