LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Luggage Room Light >> Removal

Luggage Room Light: Removal

  1. Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the light assembly - luggage room.
    CAUTION: When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around the tool, and be careful not to cause damage.
    1. Release the claws and remove the main body of the light assembly - luggage room.
    2. Disconnect the connector and remove the light assembly - _______luggage room and the bulb.
      CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
Fig 1: Locating Light Assembly Connector
G08315105Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals