Driver's Airbag Module, Curtain Airbag Module & PRETENSIONER

How to disconnect:
1. Using a flat tip screwdriver, pry the push lock upward to unlock.
2. Pull the connector to disconnect from the airbag module assembly or the retractor assembly.
Fig 1: Removing Push Lock Upward Using Flat Tip Screwdriver
Courtesy of SUBARU OF AMERICA, INC.
How to connect:

CAUTION:

Be sure to insert the connector in until it is locked.
Press in the push lock securely. Then pull it gently to make sure that it is locked.

Fig 2: Pressing Push Lock Of Driver'S Airbag Module

Courtesy of SUBARU OF AMERICA, INC.

Connect the connector in the reverse order of disconnecting. At this time, be sure to insert until a clicking sound is heard.