LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX STI >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (WRX-STI) >> Chamber Assembly >> Removal >> Hose

Chamber Assembly: Removal: Hose

  1. Disconnect the hose (front).
    NOTE: Be careful not to damage the grommet.
    Fig 1: Locating Hose (Front)
    G10265182Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the cowl panel. < Ref. to REMOVAL , Cowl Panel. >
  3. Remove clip (A), and remove the hose (rear).
    NOTE: Be careful not to damage the grommet.
    Fig 2: Locating Hose Clip (Rear)
    G10265183Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals