Knee Airbag Module: Removal
CAUTION:
- Refer to "CAUTION" of "General Description" before handling the airbag system components. < Ref. to CAUTION , General Description. >
- Do not allow harness and connectors to interfere or get tangled up with other parts.
- Turn the ignition switch to OFF.
- Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. < Ref. to
BATTERY
, NOTE, Note. >NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
- Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
- Remove the nuts to remove the knee airbag module and disconnect the harness connector. < Ref. to KNEE AIRBAG MODULE , PROCEDURE, Airbag Connector. >