DTC P2610 ECM/Pcm Engine Off Timer Performance: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
- Detected when two consecutive driving cycles with fault occur.
- GENERAL DESCRIPTION < Ref. to DTC P2610 ECM/PCM ENGINE OFF TIMER PERFORMANCE , Diagnostic Trouble Code (DTC) Detecting Criteria. >
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode < Ref. to
OPERATION , Clear Memory Mode. >, and Inspection Mode < Ref. to
PROCEDURE , Inspection Mode. >.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. | Is any other DTC displayed? | Check DTC using "List of Diagnostic Trouble Code (DTC)". < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Replace the ECM. < Ref. to
ENGINE CONTROL MODULE (ECM)
. >
NOTE:
The soak timer IC is built into the ECM.
|