LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Starting System & Charging System (WRX-STI)) >> Battery >> Removal

Section 6 (Starting System & Charging System (WRX-STI)): Battery: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the positive (+) terminal after disconnecting the negative (-) terminal of battery.
  2. Remove the harness clip of the negative terminal from the battery rod.
  3. Remove the flange nut from battery rod and remove battery holder.
    Fig 1: Locating Battery Rod Flange Nuts
    G05954448Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the battery.
scientia non olet · About LEMON Manuals