Special Tool
WARNING: This page is about a different variant/trim than selected.
| ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
|---|---|---|---|
| ST-498267600 | 498267600 | CYLINDER HEAD TABLE |
|
| ST-498457000 | 498457000 | ENGINE STAND ADAPTER RH | Used together with ENGINE STAND (499817100). |
| ST-498457100 | 498457100 | ENGINE STAND ADAPTER LH | Used together with ENGINE STAND (499817100). |
| ST-498747300 | 498747300 | PISTON GUIDE | Used for installing the piston into the cylinder. |
| ST-498857100 | 498857100 | VALVE OIL SEAL GUIDE | Used for press-fitting of intake valve guide oil seals and exhaust valve guide oil seals. |
| ST-499017100 | 499017100 | PISTON PIN GUIDE | Used for installing piston pin, piston and connecting rod. |
| ST-499097700 | 499097700 | PISTON PIN REMOVER ASSY | Used for removing piston pin. |
| ST-499587100 | 499587100 | OIL SEAL INSTALLER | Used for installing oil pump oil seal. |
| ST-499587200 | 499587200 | CRANKSHAFT OIL SEAL INSTALLER |
|
| ST-499587600 | 499587600 | OIL SEAL INSTALLER | Used for installing the camshaft oil seal. |
| ST-499597100 | 499597100 | CRANKSHAFT OIL SEAL GUIDE |
|
| ST-499597 | 499597200 | OIL SEAL GUIDE |
|
| ST-499718000 | 499718000 | VALVE SPRING REMOVER | Used for removing and installing valve spring. |
| ST-499767200 | 499767200 | VALVE GUIDE REMOVER | Used for removing valve guides. |
| ST-499767400 | 499767400 | VALVE GUIDE REAMER | Used for reaming valve guides. |
| ST-499817100 | 499817100 | ENGINE STAND |
|
| ST-499977100 | 499977100 | CRANK PULLEY WRENCH | Used for removing and installing the crank pulley. |
| ST-499977500 | 499977500 | CAM SPROCKET WRENCH | Used for removing and installing intake cam sprocket and exhaust cam sprocket. |
| ST-499987500 | 499987500 | CRANKSHAFT SOCKET | Used for rotating crankshaft. |
| ST18251AA020 | 18251AA020 | VALVE GUIDE ADJUSTER | Used for installing intake valve guides and exhaust valve guides. |
| ST18353AA000 | 18353AA000 | CLAMP PLIERS |
|
| ST18471AA000 | 18471AA000 | FUEL PIPE ADAPTER | Used for inspecting the fuel pressure. |
| ST42099AE000 | 42099AE000 | QUICK CONNECTOR RELEASE | Used for removing the quick connector. |
| ST42075AG690 | 42075AG690 | FUEL HOSE | Used for inspecting the fuel pressure.
NOTE:
This is the SUBARU genuine part.
|
| STSSM4 | - (Newly adopted tool) |
SUBARU SELECT MONITOR 4 | Used for setting of each function and troubleshooting for electrical system.
NOTE:
For detailed operation procedures of Subaru Select Monitor 4, refer to "Application help".
|