Throttle Sensor Inspection (Method With SUBARU Select Monitor)
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch to ON. (engine OFF)
- Read the throttle opening angle signal and voltage of throttle sensor using Subaru Select Monitor. < Ref. to
DISPLAY CURRENT ENGINE DATA (NORMAL MODE)
, OPERATION, Subaru Select Monitor. >
Throttle sensor Throttle opening angle signal Standard Main 0.0% Approx. 0.6 V 100.0% Approx. 3.96 V Sub 0.0% Approx. 1.48 V 100.0% Approx. 4.17 V