LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Intake System (Induction) And Turbocharger (WRX-STI)) >> Chamber Assembly >> Removal >> Hose

Chamber Assembly: Removal: Hose

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the hose (front).
    NOTE: Be careful not to damage the grommet.
    Fig 1: Locating Hose (Front)
    G10265182Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the cowl panel. < Ref. to REMOVAL , Cowl Panel. >
  3. Remove clip (A), and remove the hose (rear).
    NOTE: Be careful not to damage the grommet.
    Fig 2: Locating Hose Clip (Rear)
    G10265183Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals