LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Intake System (Induction) And Turbocharger (WRX-STI)) >> Chamber Assembly >> Installation >> Hose

Chamber Assembly: Installation: Hose

WARNING: This page is about a different variant/trim than selected.
  1. Connect the hose (rear) and install clip (A).
    Fig 1: Locating Hose Clip (Rear)
    G10265183Courtesy of SUBARU OF AMERICA, INC.
  2. Install the cowl panel. < Ref. to INSTALLATION , Cowl Panel. >
  3. Connect the hose (front).
    Fig 2: Locating Hose (Front)
    G10265182Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Align the alignment mark (a) on the chamber assembly to the alignment mark (b) on the hose (front) to connect.
    Fig 3: Aligning Alignment Mark On Chamber Assembly
    G10265190Courtesy of SUBARU OF AMERICA, INC.