Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
Judge as NG when the following conditions are established.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| < Phase1 > | |
| ELCM pressure (gauge) | > -266.6 Pa(2 mmHg, 0.1 inHg) |
| < Phase2 > | |
| ELCM pressure (gauge) | < 266.6 Pa(2 mmHg, 0.1 inHg) |
Phase 1
Time Needed for Diagnosis: 6016 ms
Phase2
Time Needed for Diagnosis: 20 seconds
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.